After the installation of windows and other structures, the question often arises – how to remove the sealant, which was accidentally applied to the wrong surface? Or wipe it off? After all, it is known that after drying the composition is quite difficult to eliminate. Because below we will describe several ways to remove it.
What is the difficulty of removing sealing compounds?
Overview of funds for removing silicone sealant
If we consider the components that make up the sealant, you can see how diverse they can be. So, silicone rubber is often used as the basis. Several components are also added:
Adhesion primer;
plasticizer;
vulcanizer;
filler.
All of them are designed to enhance the properties of sealing, increasing moisture resistance, adhesion, etc. D. In appearance, the composition resembles a viscous mixture, which densely fills the seams and joints. After a while, she hardens.
Wipe or remove incorrectly applied sealant is extremely difficult. Since the above ingredients are specially added to the composition so that it is firmly fixed on the surface, is not afraid of mechanical exposure and is not washed off with water. However, this can still be done. It is only important to use some means. If the sealant hit the skin of the hands, and you did not have time to wash it off, then it will be necessary to remove it extremely carefully so that in no case do not harm yourself. But in general, many experts simply recommend work in special gloves and work clothes.
How to remove a sealant from a tile and other surfaces?
Silicone removal experts
As already mentioned, it is extremely difficult to remove this remedy from the surface. The sealing pasta is firmly and tightly glued to the base. But it happens that you put the composition incorrectly to the surface or stained their hands. Plus everything often arises a similar task when replacing the coating. And the question of how to remove the old sealant is quite relevant. Therefore, we describe several ways to solve it. In general, two methods can be distinguished: mechanical and chemical.
The mechanical method involves cutting the layers of silicone. So, gradually the entire layer is removed step by step by step. And the smallest residues can be erased using a wire washcloth or other abrasive. If the first method does not work, then you can use the chemical method. To do this, you need to buy a tool for removing sealant (solvent). For example, compositions from trademarks are well suited: Lugato, Quilosa, Penta, Gasket Remover and a number of others. These funds are available in the form of aerosols or pasta. You can buy them in almost any construction supermarket at an affordable cost.
When working with them, it is important to be as neat as possible and follow the instructions that are registered on the package. Be sure to put on gloves. In the process of using pasta, the sealant turns into a kind of gruel. Subsequently, it is easily washed off. If an aerosol is used, then it is applied to the processed surface, and after 20 minutes the resulting porridge is already removed using a rag, spatula or any cloth. In the case when it was not possible to clean the surface the first time, the procedure is repeated again. Therefore, the question than to wipe the sealant, you should no longer have.
Remember! Before starting work, the tool should be checked – whether it will dissolve paint or varnish from nearby surfaces?
Wash the sealant from the skin of the hands – than and how?
The question was considered above – how to dissolve the sealant. But what to do if the composition accidentally hit the skin of the hands, and you did not have time to quickly wash it off? It will be difficult to wipe it in this case. It is best to select a solvent minimally injuring skin. First you should try to apply ordinary medical alcohol or dining vinegar (3% of the content). The composition is applied to the cotton wool and carefully wipe their hands.
If this did not help, then the task again arises – how to clear the sealant in this case? A medical worker or a specialist who had such an experience can suggest. Most often they select a solvent that has the most gentle composition and neatly apply it to the skin. After eliminating the sealant, the hands are necessarily lubricated with any protective ointment or cream. If there are no one at hand, then you can just apply petroleum jelly. But the best recommendation can only be preliminary protection. Namely: put on gloves and special clothes that cover other skin areas.
Subject to all of the above recommendations and methods, you will achieve the surface cleansing quickly and simply. We hope that the question is how to wash the sealant you completely disappeared and now you know exactly what to do in a particular situation.