When decorating exquisite interiors, a thought arises – how to make a gypsum cardboard ceiling? This popularity of this method is associated, first of all, with the properties of the material. From drywall you can make ceilings of various complexity – one – and multi -level. In addition, they have amazing operational characteristics. We will talk about the method of their installation below.
Drywall ceilings – what is their advantage?
Do -it -yourself gypsum plasterboard installation – video
Every day, the popularity of drywall in the decoration of the premises is increasing. Ceilings, walls, ceilings, arches, shelves and much more are made from it. Such widespread material is associated with its properties. But what are the advantages of plasterboard ceilings? Firstly, they allow you to create a flat surface without painting (putty, primer). Secondly, ceilings can be of different shapes and structures. Any designer projects practical can be implemented using GKL. Today, both one- and multi-level ceilings are successfully made.
Thirdly, they allow you to hide many surface defects and various communications (wiring, cables, etc.). Fourth, with the help of multi-level ceilings and special lighting, you can visually distinguish the space, make it more. Fifth, they are environmentally friendly. Drywall – does not contain toxins and other harmful components, therefore it does not cause allergies. It is used for decoration in many medical institutions, kindergartens, sanatoriums. In addition, this material is a certain regulator of the microclimate in the room as it can give and absorb moisture.
Making ceilings from drywall – prepare tools and materials
Video – gypsum cardboard ceiling
Gypsum plasterboard ceilings, the installation technology of which will be described below, are installed using special tools. In the process of work, you will need: a screwdriver, a shirt, a knife, roulette, sandpaper, metal spatula, drill, level, crown for holes. In addition, you also need materials. To begin with, of course, they select drywall in appearance (moisture, fire-resistant, standard) and thickness. For ceiling coatings, the thickness of 9 to 12.5 mm is considered optimal. In houses, it is recommended to use sheets of small thickness (10 mm) to facilitate structures. The type of drywall is determined depending on the type of room.
Standard sheets are suitable for sleeping rooms and living rooms. For wet rooms – moisture -resistant GKL. In addition to drywall, you also need to prepare a number of other materials. These are: guide, ceiling, connecting profile, suspension used as a fastener, anchor wedges or nails, self -tapping screws. The profile can be taken any length. One way or another, you will cut it in the process to the size of the ceiling. In particular, be careful with the connecting profile. Sometimes it comes across disgusting quality, as manufacturers use the design of a conventional profile.
How to assemble a drywall ceiling?
After everything is ready, they are wondering – how to make a drywall ceiling? For this, it is only important to follow simple instructions. We will describe the technology on the example of assembling a typical single -level ceiling. First of all, determine what type of lighting is expected in the room? Spotlights or chandeliers will be placed. The ceiling height depends on it. So, if it is planned to install a chandelier, then the height of the ceiling can be 5 centimeters. In the same case, when it is necessary to mount the lamps, then a height of 10 centimeters is needed.
First of all, the guide profile is attached. For example, you planned to hang a chandelier in the future. With the help of a hydraulic level, 50 centimeters are measured and the profile is mounted at this distance. On it, the cuts are made every 60 cm and the ceiling profile is installed. Special straight suspensions are used for its better fixing. In order for the entire design to acquire the necessary level of reliability and strength of transverse jumpers that are mounted from each other at a distance of 60 centimeters. This can be considered the design of GKL ready for further fastening on it.
Gypsum cardboard sheets before installation must be cut. Use a regular or construction knife for this. Plates of the desired size are cut off on the intended lines. Next, the ends are treated with a shirt – they remove the burrs. The assembly of the ceiling from drywall is carried out using metal screws. At the last stage, the surface is finished using facing materials (plaster, paint, wallpaper). And also attach a chandelier. However, remember, drywall ceilings are light designs, so do not hang too massive chandeliers.
If the plasterboard ceiling is made in a wet room, treat it with additional primer or moisture -proof composition.